Updated: Saturday the 16^th of August, 2008 In2Connect UK Ltd

With over 40 years experience in the supply of cable and connectors, In2Connect can provide effective solutions to a wide range of standard and custom PCB and wire-end interconnect challenges.

Our prestigious, worldwide customer base in industrial, contract PCB manufacture, computer, communications, instrumentation, aerospace and military sectors and our world-class manufacturing and supply chain are testament to our commitment to deliver a wide choice of high quality, cost effective, multipin electronic, military MIL-C connectors, wires and cables.

PRODUCTS 

In2Connect specialise in: 

• Board to board - 2mm pitch, IDC cable assemblies, Edgecard, DIN 41612/7, PC 104 +.  Custom PCB Connectors.

• Board to chassis/chassis to cabinet - Rack and panel, rectangular multipin D plug and socket, DIN 41612, HE801, 2mm backplane, 2mm Hard Metric.  ATCA, MicroTCA.

• Cabinet to cabinet/equipment to equipment - Rectangular, waterproof and filtered D and 2mm, MIL-C circular multipin wire end and panel mount connectors, filtered and Hermetic connectors, RF and Coaxial connectors, Solenoid connectors, cable harnesses. 

• Custom wires and cables - We can provide custom solutions for your specialty wire and cable requirements.  We manufacture to customer, UL or MIL-SPEC specifications and are eager to assist you with your wire or cable design, whether you require a thousand foot prototype or a production run. 

We supply connectors with contacts for PCB through hole (hand, wave, vapour phase or infra-red soldering), surface, press fit, wire wrap, panel, cable-end crimp or IDC termination.

Cable Harnessing

In2Connect have over 40 years experience in advising on specification and design of high performance cables and connectors to solve customers' specific interconnect problems.  To add value to our connector offering we can supply UK manufactured, 100% tested, labeled and bagged cable assemblies in low or high volume and will supply to the exact length required.

We are able to convert any of our connector products into cost-effective, QUALITY, cable assemblies - connector to connector, connector to open end, or panel to almost anything, saving you TIME plus the cash outlay in expensive hand or automatic machinery or materials wastage.

Our capabilities include:

• IDC, cost effective mass termination 

• Soldered or crimped multipin contacts 

• Coaxial/Triaxial connector types 

• Screened/unscreened cabling types 

• Individual wire assembly (e.g. single equipment wires to BSG210) 

• Back potting of connectors for added protection 

• Crimped, soldered and laced wiring harnesses on loom boards 

• Automatic wire "cut to length" and strip 

• Hand or semi-auto assembly 

• Quick response 

• 100% testing

Engineered Custom Wire and Cables

In2Connect work with Calmont Wire and Cable, Inc. of the USA.  Founded in 1958, Calmont are an ISO 9001 Registered manufacturer providing unique technical solutions for critical applications - from simple hook-up wire to complex, multiway, wires and cables.  Every product manufactured is made to customer, UL or MIL specifications. 

Working with PVC, Polyethylene, Silicones, ME Fluorocarbons, Polyurethane, TPE, etc. Calmont's performance is unrivalled for applications that require high reliability, small diameter, low noise, chemical resistance or maximum flex life, like:

Medical - reusable and disposable cables including optics, lumens, drain tubes for - catheters, diagnostic imaging, endoscopy, laparoscopy, medical robotics, etc. 

Military - spacecraft to satellites, aircraft, missiles, tactical comms + shipboard and subsea. 

High Flex Industrial and Robotics - robotic machine control, sensors, test and measurement, low noise EMI resistant, HV test probes.

High Temperature - silver or nickel plated conductors, etc. with Tefzel, Teflon PFA and FEP, Silicon rubber and other specialist polymers. 

Calmont can help from start-up through to full scale production/stock quantities, plus - when converting your ideas into reality is a race against time Calmont's Rapid Prototyping Service offers your concept, whether simple or complex - turned into a prototype and delivered within 2 to 3 weeks! 

Prototypes are not just limited to a traditional wire or cable.  If the design of your product lends itself to the same standard manufacturing processes, such as extrusion, cabling or braiding, the opportunities are limitless. 

Typical length produced under this program is 200 to 600 feet - ask us for a quotation! 

Our capabilities include:

• Miniaturisation of wire and cable - conductors as small as 0.002” or 44 AWG 

• Insulated wire as small as 0.005” 

• Broad variety of conductor and insulating materials 

• Composite cables including lumens, fibre optics, tubing and strength members 

• EMI/RFI Shielding 

• Laser gauging and digital micrometer measuring devices coupled with SPC for highest tolerances 

• In-house flex testing capability 

• Production to many of the MIL-Specs that do not have a Qualified Product List (QPL) such as MIL-W-16878, MIL-C-27500, MIL-C-27072 

• Manufacture of non-electrical components such as specialty profiles