New Page 1
New Page 1
Proetch Services cover all your
metal component requirements.
We offer a fast turn around
time, so when you are really up against it, Proetch's in house team can take
your design from conception to prototype, then all the stages necessary to get
you right up to and into full production. With our low cost tooling/ piece
price and fast turnaround, we can even offer a same day service.
- Short
lead times (normal lead time is 5 working days)
- Complex
profiles, burr and stress free components
- Ideal
for rapid prototyping and mass production
- Design
changes and modifications rapidly and economically produced
- Half
etch fold lines for economical forming or half etch part marking
|
|
Chemical Milling (or photochemical
machining, photochemical milling, photomilling, photofabrication, chemical
blanking, photoforming as it is also known)
is used to produce thin (up to approx. 3mm thick) metal components in all sorts
of ferrous and non-ferrous metals.
This process offers many advantages over
traditional machining methods.
Low Cost Complex Shapes - There are also
several financial advantages to this process - it is as easy to produce the most
complex of shapes as it is to produce the simplest of shims.
Low Cost Tooling and Design Modifications -
The only tooling required is a set of precision photographic negatives, which
are produced on the industry's best drawing and design packages. Once
drawn these designs are saved and can be printed off as and when required;
giving you the ability to change the part at any time if required.
Low Cost Forming and
Part Marking - With this process
you can surface etch detail into either one or both sides of a component
allowing for details such as part number or company logos to be added to
your components. This process can also be used to inscribe lines onto the
part, which then allows you to form the part by hand.
